Cleaning the stainless steel castings is very inconvenient. How to clean these castings rapidly and efficiently? Everybody follows up with me to understand.

1. Configure the etchant in proportion and stir it drastically.

2. Remove the module which has stood for more than 45minutes after welding from the transport trolley. Put the module into the etchant completely, and repeat for three times, for a total of about 3 minutes. Lift up the module and drop the liquid.

3. Put the module into the cleaning liquid immediately 3 times, for a total of about 3 ~ 4 seconds.

4.Take the module out. Dry and weather the module with the compressed air fume cock.

Wuxi Hongguang Precision Casting  Factory

Add：Hu Dai Zhen West Road No. 48-10 Binhu District Wuxi City Jiangsu Province

Contact：Yanyan Zhang

Mobile: +86-13186696559

Tel：+86-510-85595173

Fax: +86-510-85591829

E-mail: skw283@sina.com

Website: http://www.hongguangcasting.com